有机导热传输液体热稳定性的标准试验方法 

Heat transfer fluids degrade when exposed to sufficiently high temperatures. The amount of degradation increases as the temperature increases or ...
D02.L0.06  国外标准  2006年 下载次数(0)| 被引次数(0)

聚(氯乙烯)合成物的烘箱热稳定性标准实施规程 

Poly(vinyl chloride) compositions degrade by discoloration on prolonged exposure to heat. The degree of discoloration is related to the condition of ex...
D20.15  国外标准  2010年 下载次数(0)| 被引次数(0)

弹式量热器测定液烃燃料燃烧热的标准试验方法 

The heat of combustion is a measure of the energy available from a fuel. A knowledge of this value is essential when considering the thermal efficienc...
D02.05  国外标准  2009年 下载次数(0)| 被引次数(0)

电气用热收缩管的标准试验方法 

These test methods include most of the important tests used to characterize heat-shrinkable tubing. They are intended primarily for, but no...
D09.07  国外标准  2000年 下载次数(0)| 被引次数(0)

聚乙烯管及配件热熔连接的标准实施规范 

The procedures described in Sections 7-9 are primarily intended for (but not limited to) field joining of polyethylene (PE) pipe and fittings, using suitable...
F17.20  国外标准  2009年 下载次数(0)| 被引次数(0)

烃类热传导液体评价的标准指南 

The significance of each test method will depend upon the system in use and the purpose of the test method as listed under Section 5. Use the most recent edi...
D02.L0.06  国外标准  2004年 下载次数(0)| 被引次数(0)

热熔胶粘剂的热稳定性用标准试验方法 

Hot-melt adhesives must generally be applied at relatively high temperatures in order that the adhesive viscosity is low enough that it ca...
D14.50  国外标准  2007年 下载次数(0)| 被引次数(0)

聚烯烃管及配件的热熔融连接用标准实施规程 

The procedures described in Sections 7, 8, and 9, when implemented using suitable ...
F17.20  国外标准  2007年 下载次数(0)| 被引次数(0)

电气用热缩管件的标准试验方法 

These test methods include most of the important tests used to characterize heat-shrinkable tubing. They are intended primarily for, but not limited to...
D09.07  国外标准  2009年 下载次数(0)| 被引次数(0)

无负荷塑料制品热老化的标准实施规程 

1.1 This practice is intended to define the exposure conditions for testing the resistance of plastics to oxidation or other degradation when exposed solely ...
D20.50  国外标准  1992年 下载次数(0)| 被引次数(0)

耐热涂胶输送带.涂胶耐热性.要求和试验方法 

This International Standard specifies requirements and test methods for the relative level of heat resistance ofconveyor belt covers made of rubber. It gi...
ISO/TC 41  国外标准  2007年 下载次数(0)| 被引次数(0)

利用热循环技术评估压塑聚乙烯(PVC)管道质量的实施规程 

This practice is applicable to distinguish between properly and improperly extruded PVC plastic pipe. It can be used to: 2.1....
F17.40  国外标准  1987年 下载次数(0)| 被引次数(0)

聚氯乙烯复合物的试验炉加热稳定性标准规程 

Poly(vinyl chloride) compositions degrade by discoloration on prolonged exposure to heat. The degree of discoloration is related to the con...
D20.15  国外标准  2004年 下载次数(0)| 被引次数(0)

热熔胶粘剂的剪切中热断裂温度用标准试验方法 

Heat-fail temperature establishes a limiting temperature above which the adhesive is not to be exposed in service under shear load....
D14.50  国外标准  2007年 下载次数(0)| 被引次数(0)

管式热交换器.管心距、管薄板的钻孔直径.挡板和支承板 

This standard applies to tubular heat exchangers with internal tubes, welded-in or rolled-in, from unalloyed or alloyed steels. It forms the fundation for...
  国外标准  1987年 下载次数(0)| 被引次数(0)

共找到相关记录59987条12345678910下一页