刷子和漆膜滚柱的应用和评价的标准指南 

Laboratory measurement of application properties of architectural coatings generally employ a blade-type applicators that lay down films ...
D01.42  国外标准  2005年 下载次数(0)| 被引次数(0)

IA型防止儿童开启的关闭器的最小应用力矩的试验方法 

This test method may be used to: Compare the functioning of two or more kinds of Type IA closures. Determin...
D10.32  国外标准  1997年 下载次数(0)| 被引次数(0)

使用易燃和可燃喷洒材料的喷雾器标准 

This standard shall apply to the spray application of flammable or combustible materials, as herein defined, either continuously or intermittently, by any...
ANSI  国外标准  2007年 下载次数(0)| 被引次数(0)

船体表面准备和涂料涂敷的检验的标准实施规程 

This practice may be invoked by any of the parties mentioned in 1.2 and may be included as part of a specification or used to clarify or reinforce an existin...
F25.01  国外标准  1999年 下载次数(0)| 被引次数(0)

螺纹或突耳型闭塞物的应用及移动扭矩的试验方法 

These torque measurements are of value in: 5.1.1 Rating the performance of automatic capping machines, 5.1....
D10.32  国外标准  1997年 下载次数(0)| 被引次数(0)

涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求 

1 This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard powder spray b...
BSI  国外标准  2005年 下载次数(0)| 被引次数(0)

喷镀设备.有机粉状涂料喷镀间.安全性要求 

1.1 This European Standard is applicable to spray booths for spray application of organic coating powder,called in this European Standard “powder spray bo...
BSI  国外标准  2005年 下载次数(0)| 被引次数(0)

涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理 

This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also c...
ISO/TC 35  国外标准  2000年 下载次数(0)| 被引次数(0)

涂料和相关制品使用前钢衬底的制备.表面制备方法.第2部分:磨料喷砂清理 

This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also c...
BSI  国外标准  2000年 下载次数(0)| 被引次数(0)

涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则 

This part of ISO 8504 describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and...
ISO/TC 35  国外标准  2000年 下载次数(0)| 被引次数(0)

测量辊涂机耐涂料喷溅的标准试验方法 

Paint spatter generated by roller application is dependent on the properties of both the paint being applied and the paint roller cover use...
D01.42  国外标准  1997年 下载次数(0)| 被引次数(0)

测量辊涂机耐涂料喷溅的标准试验方法 

Paint spatter generated by roller application is dependent on the properties of both the paint being applied and the paint roller cover used for the ...
D01.42  国外标准  2009年 下载次数(0)| 被引次数(0)

在拉伸和压缩轴向力作用下验证试验框架和样品准直精度的标准实施规程 

It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the `...
E28.04  国外标准  2005年 下载次数(0)| 被引次数(0)

热喷涂.工程元件用热喷镀涂层的应用程序. 

  国外标准  2011年 下载次数(0)| 被引次数(0)

热喷涂.工程零件热喷涂涂层的应用步骤(ISO 14921-2010);德文版本EN ISO 14921-2010 

This International Standard specifies the general procedure, when a thermally sprayed coating is applied to enhance the surface properties of a component or to ...
  国外标准  2011年 下载次数(0)| 被引次数(0)

共找到相关记录71908条12345678910下一页