Hierarchical Micropore/Nanorod Apatite Hybrids In-Situ Grown from 3-D Printed Macroporous Ti6Al4V Implants with Improved Bioactivity and Osseointegration 

The advent of three-dimensional(3-D) printed technique provides great possibility in the fabrication of customized porous titanium(Ti) implant. However, t...
《Journal of Materials Science & Technology》  2017年 第02期 下载次数(14)| 被引次数(1)

The corrosion behavior of nano-meter embedded phase in Ti implanted H13 steel 

On the SEM micrographs of Ti implanted H13 steel, a tree-branch-like structure can be observed. Further investigation with TEM shows that the newly to...
《Science in China(Series E:Technological Sciences)》  1999年 第06期 下载次数(37)| 被引次数(0)

Antibacterial properties and corrosion resistance of AISI 420 stainless steels implanted by silver and copper ions 

Silver or copper ions are often chosen as antibacterial agents. But a few reports are concerned with these two antibacterial agents for preparation of antibacte...
《International Journal of Minerals Metallurgy and Mat…》  2012年 第04期 下载次数(59)| 被引次数(8)

Antibacterial and corrosive properties of copper implanted austenitic stainless steel 

Copper ions were implanted into austenitic stainless steel (SS) by metal vapor vacuum arc with a energy of 100 keV and an ions dose range of (0.5-8.0)×101...
《International Journal of Minerals Metallurgy and Mat…》  2009年 第03期 下载次数(39)| 被引次数(9)

Nano-phases and corrosion resistance of C+Mo dual implanted steel 

The corrosion resistance of C + Mo dual-implanted HI3 steel was studied using multi-sweep cyclic voltammetry. The phase formation conditions for corros...
《Science in China(Series E:Technological Sciences)》  2001年 第04期 下载次数(26)| 被引次数(0)

Microstructure in implanted layer of 1Cr18Ni9 steel implanted at elevated temperature 

Microstructure and composition of 1Cr18Ni9 austenitic stainless steel implanted with nitrogen at elevated temperature were investigated by glancing angle ...
《Rare Metals》  2007年 第S1期 下载次数(24)| 被引次数(0)

Nanometer structure and conductor mechanism of polymer modified by metal ion implantation 

Polyethylene terephthalate (PET) has been modified by Ag, Ti, Cu and Si ion implantation with a dose ranging from 1 × 1016 to 2 × 1017 ions/cm2 using a metal...
《Science in China(Series E:Technological Sciences)》  2001年 第05期 下载次数(19)| 被引次数(0)

Effect of thermal oxidation on the surface characteristics and corrosion behavior of a Ta-implanted Ti-50.6Ni shape memory alloy 

A NiTi shape memory alloy (SMA) modified by Ta ion implantation was subjected to oxidation treatment in air at 723 and 873 K. Atomic force microscopy (AFM), Aug...
《International Journal of Minerals Metallurgy and Mat…》  2012年 第12期 下载次数(34)| 被引次数(3)

Irradiation damage simulation of Zircaloy-4 using argon ions bombardment 

To simulate irradiation damage,argon ion was implanted in the Zircaloy-4 with the fluence ranging from 1×10~(16) to 1×10~(17) cm~(-2),using acceleratin...
《Journal of University of Science and Technology Beij…》  2008年 第03期 下载次数(47)| 被引次数(3)

Influence of Aluminum Ions Implantation on Corrosion Behavior of Zircaloy-2 Alloy in 1 M H_2SO_4 

The specimens were implanted with aluminum ions with fluence ranging from 1×1016 to 1×1017 ions/cm2 to study the effect of aluminum ion implantation on th...
《Journal of Wuhan University of Technology(Materials …》  2007年 第03期 下载次数(26)| 被引次数(0)

Nanophase formation and its behavior of corrosion resistance in C+ Ti dual implanted steel 

After corrosion and pitting corrosion, the wire nanometer phases are observed using a transmission electron microscope (TEM) in C + Ti dual implanted H...
《Science in China(Series E:Technological Sciences)》  2002年 第01期 下载次数(19)| 被引次数(0)

The formation and stability of Si_(1-x)C_x alloys in Si implanted with carbon ions 

Si1-xCx alloys of carbon (C) concentration between 0.6%-1.0% were grown in Si by ion implantation and high temperature annealing. The formation of Si1-xCx al...
《Chinese Science Bulletin》  2001年 第03期 下载次数(8)| 被引次数(0)

STUDY OF SURFACE RESISTIVITY MODIFICATION IN Al_2O_3 CERAMIC IMPLANTED BY Fe~(2+) 

The implanted ion range, the depth profileand the film sttucture of the implanted layer werestudied; the carrier concentration and the mobilityw...
《Journal of Wuhan University of Technology-Materials …》  1991年 第02期 下载次数(20)| 被引次数(0)

Ta和Ag离子注入Ti6A14V合金表面改性研究 

医用金属生物材料的磨损、腐蚀等原因造成的人工骨和关节材料的无菌松动是影响其长期服役效果和寿命的主要问题。离子注入的膜基结合独特,不会改变基体材料的外观形状和尺寸,用于生物材料表面改性具有独特的优势。Ti6Al4V合金具有优异的综合力学性能和良好的生物相容性,在临床中得到了广泛应用。本论文针对生物医用Ti6Al...
昆明理工大学  博士论文  2008年 下载次数(423)| 被引次数(5)

Vascularization in interconnected 3D printed Ti-6Al-4V foams with hydrogel matrix for biomedical bone replacement implants 

Vascularization on newly implanted metal orthopedic implants has remained a challenge in the field of tissue engineering. To address this challenge,...
《Science China Materials》  2018年 第04期 下载次数(25)| 被引次数(1)

共找到相关记录2003条12345678910下一页