绝缘软套管.第3部分:各种型号软套管规范.活页282:热缩,聚烯烃软套管.电场控制 

This part of IEC 60684 gives the requirements for two types of heat-shrinkable, polyolefinsleeving, stress control, not flame retarded, with a nominal shr...
IEC/TC 15  国外标准  2010年 下载次数(0)| 被引次数(0)

额定热输入值不超过6KW型号为B22D和B23D的家用直接燃气滚筒式烘干机.安全性 

This Part 1 of the European Standard EN 1458 specifies the requirements and test methods for the construction, safety, and marking of domestic direct gas-fired ...
BSI  国外标准  2000年 下载次数(0)| 被引次数(0)

绝缘软管.各种型号软管规范.热收缩聚烯烃软管 

This standard gives the requirements for four types of heat-shrinkable polyolefin sleevingssuitable for use at temperatures up to 135 °C.Type A Flame reta...
BSI  国外标准  2006年 下载次数(0)| 被引次数(0)

热收缩铸造模型.试验方法 

This part of IEC 62329 gives methods of test for heat-shrinkable moulded shapes in a range ofconfigurations and materials suitable for insulation, environ...
BSI  国外标准  2006年 下载次数(0)| 被引次数(0)

热收缩模型规范.定义和一般要求 

This standard is applicable to heat shrinkable moulded shapes in a range of configurationsand materials suitable for insulation, environmental sealing, me...
BSI  国外标准  2006年 下载次数(0)| 被引次数(0)

绝缘软管.第3部分:各种型号软管规范.活页271:阻燃、耐流体、收缩比2:1的热收缩、弹性体软管 

Gives the requirements for two types of heat-shrinkable, flame retarded, fluid resistant, elastomer sleevings, with a nominal shrink ratio of 2:1 for use ...
IEC/TC 15  国外标准  2004年 下载次数(0)| 被引次数(0)

家用和类似用途电器.安全性.繁殖和饲养动物用电加热器的详细要求 

This clause of Part 1 is replaced by the following.This standard deals with the safety of all kinds of electrical heating appliances used forlivestock rea...
BSI  国外标准  2003年 下载次数(0)| 被引次数(0)

加热系统用控制器.电气系统用最佳起止控制设备 

This European Standard applies to electronic equipment which controls electrical heating. In this EuropeanStandard, equipments are tested to verify confor...
BSI  国外标准  2005年 下载次数(0)| 被引次数(0)

柔性绝缘套管.第3部分:单个型号套管规范.活页283:母线绝缘用热缩减聚烯烃套管 

This part of IEC 60684 gives the requirements for two types of heat-shrinkable, polyolefinsleeving for bus-bar insulation, with a nominal shrink ratio of ...
IEC/TC 15  国外标准  2010年 下载次数(0)| 被引次数(0)

电绝缘用交链氯化聚烯烃热缩管规范 

This specification covers flexible crosslinked chlorinated polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is supplied in an...
ASTM  国外标准  2003年 下载次数(0)| 被引次数(0)

电绝缘用交联和非交联聚乙烯热缩管型材料规范 

This specification applies to flexible, crosslinked and noncrosslinked poly(vinyl chloride) heat-shrinkable tubing for electrical insulating purposes. It ...
ASTM  国外标准  2000年 下载次数(0)| 被引次数(0)

电绝缘用交链和非交链聚氯乙烯热缩管件的规范(10.02) 

  国外标准  1995年 下载次数(0)| 被引次数(0)

螺套用不超过2 mm的耐热镍铬铁钛铌铝合金圆导线规范(镍基Cr15.5-Fe7.0-Ti2.5-Nb/Ta0.95-Al0.70) 

This British Standard specifies requirements for nickel-chromium-irontitanium-niobium-aluminium heat-resisting alloy round wire with amaximum diameter of ...
BSI  国外标准  2010年 下载次数(0)| 被引次数(0)

电缆.电流定额的计算.第3-3部分:运行条件的章节.横越外部热源的电缆 

This part of IEC 60287 describes a method for calculating the continuous current rating factorfor cables of all voltages where crossings of external heat ...
IEC/TC 20  国外标准  2007年 下载次数(0)| 被引次数(0)

绝缘软套管规格.各种型号软套管规格要求.热收缩聚四氟乙烯(PTFE)绝缘软套管 

These sheets of IEC 60684-3 give the requirements for heat-shrinkable (low and high shrinkratio) polytetrafluorethylene (PTFE) sleeving. It is normally av...
BSI  国外标准  2002年 下载次数(0)| 被引次数(0)

共找到相关记录46198条上一页>12345678910下一页