绝缘软套管.第3部分:各种型号套管规范.活页216:热缩、阻燃、耐火套管.修改件1 

This is Amendment 1 to IEC 60684-3-216-2001 (Flexible insulating sleeving -Part 3:Specifications for individual types of sleeving -Sheet 216: Heat-shrinka...
IEC/TC 15  国外标准  2005年 下载次数(0)| 被引次数(0)

绝缘软套管.第3部分:各种型号套管的规范.第211活页:收缩比率为2:1的半刚性聚烯烃热收缩软管 

This part of IEC 60684 gives the requirements for four types of semi-rigid, heat-shrinkable polyolefin sleeving with a nominal shrink ratio of 2:1 that ha...
IEC/TC 15  国外标准  2007年 下载次数(0)| 被引次数(0)

着火危险试验.第8-1部分:放热.一般指南 

This part of IEC 60695 provides guidance on the measurement and interpretation of heatrelease from electrotechnical products and materials from which they are c...
IEC/TC 89  国外标准  2008年 下载次数(0)| 被引次数(0)

绝缘软套管.第3部分:各种型号套管的规范要求.第229活页:热缩半挠性阻燃抗液流收缩比2:1的聚偏二氟乙烯套管 

Gives the requirements for one type of heat shrinkable, semi-flexible, polyvinylidene fluoride, flame retarded, fluid resistant sleeving that has been fou...
IEC/TC 15  国外标准  2003年 下载次数(0)| 被引次数(0)

绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收缩聚四氟乙烯(PTFE)绝缘软管 

Gives requirements for heat-shrinkable PTFE sleeving available in expanded bore sizes up to 12 mm as supplied in the low shrink ratio and up to 100 mm as ...
IEC/TC 15  国外标准  2002年 下载次数(0)| 被引次数(0)

电子设备连接器.试验和测量.第11-9部分:气候试验.试验11i:干热 

This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee ...
IEC/SC 48B  国外标准  2002年 下载次数(0)| 被引次数(0)

热收缩模型规范.第2部分:试验方法 

This part of IEC 62329 gives methods of test for heat-shrinkable moulded shapes in a range ofconfigurations and materials suitable for insulation, environ...
IEC/TC 15  国外标准  2006年 下载次数(0)| 被引次数(0)

绝缘软套管.第3部分:各种型号套管的规范.第248节:收缩比率为2:1、3:1、4:1的双壁阻燃聚烯烃热收缩软管一般用途 

This part of IEC 60684 gives the requirements for six types of general purpose, heat shrinkable dual wall polyolefin sleevings, flame retarded with nomina...
IEC/TC 15  国外标准  2007年 下载次数(0)| 被引次数(0)

绝缘软管.第3部分:各种型号软管规范.活页216:热缩、阻燃、耐火软管 

This standard is Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limit...
IEC/TC 15  国外标准  2003年 下载次数(0)| 被引次数(0)

绝缘软管 第3部分:各种型号软管规范 活页216:热缩,阻燃,有限着火危险软管 

This sheet of IEC 60684-3 gives the requirements for four types of heat-shrinkable, flame-retarded, limited-fire-hazard sleeving with a thermal endurance ...
IEC/TC 15  国外标准  2001年 下载次数(0)| 被引次数(0)

绝缘软套管规范.第3部分:各种型号套管的规范.活页209:通用阻燃聚烯烃收缩的热收缩套管 

This part of IEC 60684 gives the requirements for two types of general purpose, flexible, flameretarded, heat-shrinkable polyolefin sleeving. This sleevin...
IEC/TC 15  国外标准  2010年 下载次数(0)| 被引次数(0)

绝缘软套管.各种型号套管的规范.收缩比率为2:1、3:1、4:1的阻燃热缩双壁聚烯烃套管一般用途 

This part of IEC 60684 gives the requirements for six types of general purpose, heat shrinkabledual wall polyolefin sleevings, flame retarded with nominal...
BSI  国外标准  2007年 下载次数(0)| 被引次数(0)

柔性绝缘软管.各种型号软管规范.热收缩、阻燃、耐火软管 

This sheet of IEC 60684-3 gives the requirements for four types of heat-shrinkable, flameretarded,limited-fire-hazard sleeving with a thermal endurance ra...
BSI  国外标准  2005年 下载次数(0)| 被引次数(0)

绝缘软套管.第3部分:各种型号软套管规范.活页280:热缩,抗留漏电聚烯烃套管 

This part of IEC 60684 gives the requirements for heat-shrinkable, polyolefin sleeving, antitrackingwith a nominal shrink ratio of 3:1.This sleeving has b...
IEC/TC 15  国外标准  2010年 下载次数(0)| 被引次数(0)

绝缘软套管.第3部分:各种型号软套管规范.活页281:热缩,聚烯烃半导体软套管 

This part of IEC 60684 gives the requirements for two types of heat-shrinkable, polyolefinsleeving, semiconductive, with a nominal shrink ratio of 3:1.Thi...
IEC/TC 15  国外标准  2010年 下载次数(0)| 被引次数(0)

共找到相关记录49378条上一页>12345678910下一页