镍-铬-钛耐热合金棒材、线材和铆钉(镍基、Cr19.5、Ti0.4)规范 

British Standard: Aerospace Series Specification for Nickel-chromium-titanium heat-resisting alloy bar, wire and rivets1. Inspection and testing proced...
BSI  国外标准  1973年 下载次数(0)| 被引次数(0)

冷加工和软化的无缝镍铬钴钛铝耐热合金管(镍基、Cr19.5、Co18.0、Ti2.5、Al1.5)规范 

British Standard : Aerospace Series Specification forNickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless t...
BSI  国外标准  1973年 下载次数(0)| 被引次数(0)

热交换器和冷凝器用无缝冷拉低碳钢管的标准规范 

1.1 This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar `...
A01.09  国外标准  1990年 下载次数(0)| 被引次数(0)

具有整体散热叶片的冷凝器及热交换器用铜及铜合金无缝管的标准规范 

1.1 This specification establishes the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been ...
B05.04  国外标准  2002年 下载次数(0)| 被引次数(0)

电工用耐热铝锆合金丝的标准规格 

1.1 This specification covers heat resistant aluminum-zirconium alloy round wire for electrical purposes. There is a family of aluminum-zi...
B01.07  国外标准  2010年 下载次数(0)| 被引次数(0)

镍-铬-钛-铝耐热合金坯锭、棒材、锻件和部件(镍基、Cr 19.5、Co18.0、Ti25、Al 1.5)规范 

British Standard: Aerospace Series Specification for Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts1....
BSI  国外标准  1973年 下载次数(0)| 被引次数(0)

过程加热系统的能量评估 

This Standard covers process heating systems that are defined as a group (or a set, or combination) of heating equipment used for heating mate...
ANSI  国外标准  2009年 下载次数(0)| 被引次数(0)

铬-镍-钼-钒耐热钢薄板材和钢带规范(930-1130MPa:最大厚度6mm)(铬12、镍2.5、钼1.7、钒0.3) 

British Standard: Aerospace SeriesSpecification forChromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum t...
BSI  国外标准  1975年 下载次数(0)| 被引次数(0)

过程加热系统的能量评估 

This Standard covers process heating systems that are defined as a group (or a set, or combination) of heating equipment used for heating mate...
ASME  国外标准  2009年 下载次数(0)| 被引次数(0)

金属与合金的腐蚀 溶解热处理铝合金的耐晶间腐蚀性的测定 

Specifies the methods of intergranular corrosion testing for solution heat-treatable aluminium alloys without protective coatings. Applies to cast and wro...
ISO/TC 156  国外标准  1995年 下载次数(0)| 被引次数(0)

制造螺栓、螺柱、定位螺钉和螺母用耐热高膨胀钢棒材和线材(Ni25.5、Cr15、Ti2、Mn1.5、Mo1.25、Si0.7、V0.3)(限制最大计量断面20mm)规范 

BRITISH STANDARD : AEROSPACE SERIES SPECIFICATION FORHIGH EXPANSION HEAT-RESISTING STEEL BAR AND WIRE FOR THE MANUFACTURE OF BOLTS, STUDS, SET SCREWS A...
BSI  国外标准  1972年 下载次数(0)| 被引次数(0)

热处理部件用高碳弹簧钢丝的标准规范 

1.1 This specification covers round carbon spring steel wire in coils intended for the manufacture of mechanical springs and wire forms that are heat t...
A01.03  国外标准  2004年 下载次数(0)| 被引次数(0)

蒸汽涡轮机轴和转子锻件热稳定性的标准规范 

1.1 This specification covers the determination of heat stability of steam turbine shafts and rotor forgings to ensure stability at operating temperatu...
A01.06  国外标准  2007年 下载次数(0)| 被引次数(0)

热处理部件用高碳弹簧钢丝的标准规范 

1.1 This specification covers round carbon spring steel wire in coils intended for the manufacture of mechanical springs and wire forms that are ...
A01.03  国外标准  2004年 下载次数(0)| 被引次数(0)

锅炉、过热器和热交换器用无缝铁素体和奥氏体合金钢管规范 

This specification covers minimum-wall-thickness, seamless ferritic and austenitic steel, boiler and superheater tubes and austenitic steel heat-exchanger...
  国外标准  2001年 下载次数(0)| 被引次数(0)

共找到相关记录102838条上一页>12345678910下一页