高级检索
|
CNKI首页
|
登录
|
注册
排序:
相关度
被引次数
下载次数
时间
搜索位置:
全文
|
主题
|
篇名
|
作者
|
摘要
Clinical evaluation of Xive
implants
3-year after placement
Objective: The main purpose of this retrospective study is to evaluate clinical outcomes of Xive implants 3-year after insertion. Methods: 219 Xive implants wer...
《Journal of Nanjing Medical University》 2008年 第06期
下载次数(20)| 被引次数(0)
Influence of Abutment Material on the Stress of
Implant
-supported All-ceramic Single Crown
In order to investigate the influence of abutment material on the stress of implant-supported all-ceramic single crown, a 3D finite element model of implant-sup...
《Journal of Wuhan University of Technology(Materials …》 2012年 第01期
下载次数(44)| 被引次数(2)
种植体直径对颧骨种植义齿骨界面应力分布的影响
目的:探讨种植体直径对颧骨种植义齿骨界面应力分布的影响,阐明种植体直径与颧骨种植义齿远期成功的相关性。方法:建立上颌骨、颧骨三维有限元模型,设计3种不同种植体直径(3.5、4.0和5.0 mm)的颧骨种植义齿工况,进行垂直向、斜向加载,分析种植体-骨界面的应力分布状况。结果:建成的三维模型从任意角度观察与CT图像具备良...
《吉林大学学报(医学版)》 2009年 第04期
下载次数(192)| 被引次数(2)
Restricted nutrient intake does not alter serum-mediated measures of
implant
response in cell culture
Background: During nutritional stress, reduced intake may reduce the efficacy of anabolic implants. This study was conducted to evaluate basic cellular response...
《Journal of Animal Science and Biotechnology》 2014年 第01期
下载次数(13)| 被引次数(1)
Micromotions and combined damages at the dental
implant
/bone interface
Micromotion and fretting damages at the dental implant/bone interface are neglected for the limitation of check methods, but it is particularly important for th...
《International Journal of Oral Science》 2012年 第04期
下载次数(57)| 被引次数(4)
Hierarchical Micropore/Nanorod Apatite Hybrids In-Situ Grown from 3-D Printed Macroporous Ti6Al4V
Implants
with Improved Bioactivity and Osseointegration
The advent of three-dimensional(3-D) printed technique provides great possibility in the fabrication of customized porous titanium(Ti) implant. However, the bio...
《Journal of Materials Science & Technology》 2017年 第02期
下载次数(16)| 被引次数(1)
Effects of zinc-substituted nano-hydroxyapatite coatings on bone integration with
implant
surfaces
Objective:The purpose of this study was to investigate the effects of a zinc-substituted nano-hydroxyapatite(Zn-HA) coating,applied by an electrochemical proces...
《Journal of Zhejiang University-Science B(Biomedicine…》 2013年 第06期
下载次数(47)| 被引次数(7)
计算机辅助设计(CAD)的种植手术导板的应用
目的:采用计算机辅助设计和制造种植手术的导板,较好地保证种植体植入在正确的位点和方向。方法:按照导板制做的数据要求,用CT扫描患者的上下颌骨,在获取颌骨数据后输入种植导板设计的软件中,并引导制造出患者颌骨的硅胶模型,在此模型上作出准确的种植手术导板并在手术中应用。结果:6例患者采用计算机辅助设计引导下制造的手术导板较好...
《中国口腔种植学杂志》 2011年 第01期
下载次数(262)| 被引次数(1)
牙周炎患者即刻修复的临床观察
目的:对牙周炎患者行即刻修复进行临床观察研究。方法:选择于2008年5月至2009年5月期间在中山大学光华口腔医学院附属口腔医院种植科就诊的具有牙周炎病史的牙列缺损或牙列缺失患者,共31例(男16例,女15例)。所有患者均已行完善的牙周治疗。共植入种植体107枚,均于手术当天完成树脂临时修复。术后3个月行永久修复。结果...
《中国口腔种植学杂志》 2010年 第03期
下载次数(245)| 被引次数(3)
The influence of mechanical loading on osseointegration:an animal study
Osseointegration of implant provides a stable support for the prosthesis under functional loads.The timing of loading is a critical parameter that can govern th...
《Science in China(Series C:Life Sciences)》 2009年 第06期
下载次数(42)| 被引次数(4)
High density porous polyethylene material (Medpor) as an unwrapped orbital
implant
Objective: To introduce the clinical effect among patients who received an unwrapped orbital implant with high density porous polyethylene material (Medpor) aft...
《Journal of Zhejiang University Science(Life Science)》 2006年 第08期
下载次数(9)| 被引次数(1)
40单位inCoris ZI二氧化锆CAD/CAM种植修复体的临床观察
目的:探讨inCorisZI二氧化锆全瓷修复在种植修复的临床应用。方法:选取ITI种植术后病例,采用CEREC技工CAD/CAM系统修复,根据修改的USPHS标准,观察时间6~18月,对修复效果进行评价。结果:18例患者植入38个种植体,冠桥等共40单位修复体,仅1例饰瓷脱落,其余修复体均正常,修复体成功率为95%。结...
《中国口腔种植学杂志》 2011年 第01期
下载次数(110)| 被引次数(4)
植入位点不同对颧骨种植义齿种植体周骨应力分布影响的研究
目的探讨植入位点不同时颧骨种植义齿种植体-骨界面的应力分布规律。方法计算机模拟建立上颌后牙区重度萎缩三维有限元模型,分别在第一前磨牙区、第二前磨牙区、第一磨牙区和第二磨牙区模拟颧骨种植义齿修复。进行垂直向、颊向30°和舌向30°加载100N,统计分析植入位点不同时颧骨种植义齿种植体-骨界面的应力。结果1)第一前磨牙区颧...
《华西口腔医学杂志》 2010年 第01期
下载次数(199)| 被引次数(0)
慢速法制备种植体窝洞原位取骨的临床疗效评价
目的:牙缺失后,牙槽骨存在不同程度的吸收,给后期的种植治疗造成不利的影响。由于自体骨是修复骨缺损的最佳植入材料,目前,临床上常用的种植体窝制备方法是在不同的种植体窝制备阶段使用不同的转速,且需要全程冲水以防止产生过热的温度,切屑的骨组织被水冲走而流失,如需要收集这部分自体骨需要特别的器械,效果却并不好。因此,我们对需要...
《中国口腔种植学杂志》 2011年 第01期
下载次数(103)| 被引次数(0)
种植体长度对即刻负载种植体骨界面生物力学分布的影响
目的:建立包含不同长度标准直径种植体的下颌骨三维有限元模型,分析不同长度种植体对即刻负载种植体骨界面应力应变分布的影响。方法:采用薄层CT扫描下颌骨和自主开发的USIS软件建立直径4.1mm不同长度螺纹种植体即刻负载的三维有限元模型,用ANSYS软件分析长度分别为6、8、10、12、14mm的种植体,在垂直和颊舌向45...
《中国口腔种植学杂志》 2009年 第02期
下载次数(133)| 被引次数(4)
共找到相关记录1052条
上一页>
1
2
3
4
5
6
7
8
9
10
下一页
相关搜索:
高级检索
文献类型筛选
>> 全部 (1052)
>> 学术期刊 (1052)
>> 博士论文 (0)
>> 硕士论文 (0)
>> 会议论文 (0)
>> 报纸全文 (0)
>> 科技成果 (0)
>> 中国专利 (0)
>> 中国标准 (0)
>> 国外标准 (0)
学科分类
>> 全部
>> 口腔科学
>> 外科学
>> 生物医学工程
>> 眼科与耳鼻咽喉科
>> 内分泌腺及全身性疾病
>> 临床医学
>> 仪器仪表工业
>> 基础医学
>> 特种医学
>> 肿瘤学
>> 计算机软件及计算机应用
>> 医药卫生方针政策与法律法规研究
>> 金属学及金属工艺
>> 预防医学与卫生学
>> 无线电电子学
>> 妇产科学
>> 生物学
>> 医学教育与医学边缘学科
>> 药学
>> 电信技术
更多↓